GARDENIC
EN
22
i)
There may be sparks in the vicinity of the engine during the initial period of use
of the equipment. This is normal and should stop after a short period of time.
5)
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained
on the same level.
6)
Storage and transport
Carry the hedge trimmer by the handle with the cutter blade stopped. When
transporting or storing the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce possible personal injury from the
cutter blades. It is not permitted to carry or lift the device while holding the power
cord or while the blade is working.
Keep the unit in a place where it will not be exposed to liquids, dust, heat or extreme
cold, or where children, bystanders or animals will not have access to it.
5. EXPLANATIONS OF THE SYMBOLS
WARNING!
To reduce the risk of injury, the user must read the user
manual.
The device is marked with a crossed-out garbage bin, in accordance with the
European Directive 2012/19/EU on used electrical and electronic Equipment
(Waste Electrical and Electronic equipment - WEEE). Products marked with
this symbol should not be disposed of or dumped with other household waste
after a period of use. The user is obliged to get rid of used electrical and
electronic equipment by delivering it to designated recycling point in which
dangerous waste are being recycled. Collecting this type of waste in
designated locations, and the actual process of their recovery contribute to
the protection of natural resources. Proper disposal of used electrical and
electronic equipment is beneficial to human health and environment. To
obtain information on where and how to dispose of used electrical and
electronic equipment in an environmentally friendly manner user should
contact their local government office, the waste collection point, or point of
sale, where the equipment was purchased.
This symbol indicates a Class II device with double insulation. This class of
devices is characterized by reinforced insulation providing protection against
direct and indirect contact. Besides basic insulation, additional insulation is
also used.
The mark placed on the product indicates that the product complies with the
basic requirements and other provisions of the so-called "Directive of the
'New Approach' Directive of the European Union.
