MP Filtri ICM, User Manual

Page: 37 / 82

Settings 37
Turns on When Test Complete >Lower
Intended Function Test Complete Signal "not clean’’ Signal
This is used when controlling tests from a PLC using switched outputs. The PLC
gives a start signal, then monitors the "Test Complete’’ output. If the test has failed
it can detect this with the "not clean’’ signal.
``Continuous testing’’ should not be selected for this mode.
Alarm Mode 6: Testing-not Clean
Output 1 Output 2
Turns on When Testing >Lower
Intended Function Test in progress signal "not clean’’ Signal
This is similar to mode 5 above. The difference is that output 1 is active during the
test and turns off at test end.
``Continuous testing’’ should not be selected for this mode.
Alarm Mode 7... Customer Requested Modes
Other alarm modes will be defined as and when customers request them.