MP Filtri ICM, User Manual

Page: 15 / 82

Front Panel Operation 15
5 Front Panel Operation
5.1 Result Display
ICM-K models have a 6 button keypad and a small graphical
LCD. This allows the display of the test result (current cleanli-
ness level, with water content and temperature if applicable).
Figure 5.1
The graphical format allows a full display of all codes of the standards supported.
The unit powers up in "Display Mode’’. This displays the test result in the selected
format. Figures 5.2 onward show those available.
4
The screenshots on the right are
the "detailed’’ version of the display additionally showing the particle counts and
flow rate. The particle sizes and count representation are automatically matched to
the selected format.
There is also a ``History’’ screen which shows the last 10 results.
The operator can switch between these screens using the
▲
and
▼
keys.
The horizontal line is the progress bar, it grows from left to right as the test pro-
gresses. When it reaches the right hand side a new result is generated.
5.2 Diagnostics Display
Press < to show the diagnostics displays (used when diagnosing problems). Then
switch between the diagnostics screens using the
▲
and
▼
buttons.
Completion shows a number from 0 to 1000, indicating the test progress. FLOW
ml/min provides an approximate indication of flow rate, updated after each test.
4
The selected format is typically set during installation (using LPA-View). The rationale is that each in-
dustry or company will have its preferred format, it is not something that an operator should be changing.