Mova P253i, Manual, Page: 284 / 420

282
Data
D
isplay,
Editing
and
M
anagement
You can check the capacity of the Data Folder.
You can also check “Used in each fldr” for the ratio of the used space by folder.
P
You can check the memory status of the miniSD memory card when it is inserted.
1
From the mova’s memory list,
( ) “Phone space”
When a miniSD memory card is inserted,
select “Check SD space” from the sub-menu of the miniSD memory card list, and press .
2
Press to show overall capacity and the used space in each
folder.
P
The data files stored as secret are also included in volume.
P
The bar graphs are displayed with rounding down in 10% units.
P
The system file is pre-installed in the miniSD memory card, so the used space is not 0% even if files are not saved.
P
The bar graphs for used files, and the total numbers are not displayed on the miniSD memory card.
Information
When you cannot save data files because the memory is full, delete unnecessary data files first,
and then save the new ones.
1
From the confirmation display,
select “YES”
P
To cancel, select “NO” and press .
2
Select the data files to be deleted
3
“YES”
P
To cancel, select “NO” and press .
P
You may need to repeat steps 2 and 3 depending on the size of data file to be saved.
P
After auto-20-snap or Animeditor shooting, it may take a few minutes for the images to be saved.
Checking Memory Usage Status <Space Check>
When Memory Runs Short or the Number of Saved Data Files Reaches Limit
❈
You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. r P.253