Mova P253i, Manual, Page: 186 / 420

184
i-mode
“ ” (Message R) or “ ” (Message F) appears to inform you that a message has been received.
P
Message F is a message delivered free of transmission charge when the option
setting is set for reception.
P
You can confirm the contents by performing the operation “Reading the Message
List/Detailed Display”.
r
P.186
Once you subscribe to a message service of a site (program), your mova will automatically
receive the information distributed by the provider via the i-mode center.
After “Receiving” is displayed, the message ring tone sounds, the Call Indicator flickers, and the
display lights.
P
“Receiving” is displayed on the sub display when the mova is closed.
P
If you have been using i-mode, the former display returns.
P
Messages are not automatically received but held at the i-mode center when the mova is placed in the following status:
•
While the power is off
•
Out of the i-mode service area
•
During calls
•
During i-mode Lock
•
During Self Mode
•
The message box is full of unread or protected messages.
The mova works according to the
“
Call w/ i-mode
”
setting currently set.
r
P.177
After a message is received, you might not be able to operate during i-mode standby.
Press
, then try again.
r
P.155
Receiving Messages
<Receive Messages>
After Receiving Messages
If there is an incoming call while receiving a message
If you could not receive messages because you were out of the i-mode service area or the power
was turned off, you can check if messages are held at the center.
r
P.206
Inquiring whether Center Holds Messages <Check New Messages>
If you receive a message during standby, the message is automatically displayed
according to Message Auto-display you have set. (Auto-display does not work
while Key Guard or Keypad Lock is activated.)
P
Press to return to the Standby display. Also, if no key is pressed for about 15
seconds, the Standby display returns.
P
If you press keys other than , the contents of the message will remain displayed
as read.
Displaying New Message
Menu
r
オプション設定 (Options)
r
メッセージ F 設定 (Message F setting)
r
After selecting “ 受信する (Receive)”, enter
the i-mode password (four digits) in the box of “
ｉモードパスワード (数字4桁)
” and execute “
決定
(OK)”
Setting Message Free (Message F)