Motrona touchMATRIX AX350, Operating Manual

Page: 39 / 54

Ax350_04a_oi_e.doc / May-18 Seite 39 / 54
Continuation „Display Menu:“
SOURCE DUAL TOP (Reference source for two-line display, first line)
0 INPUT 1
the reference source is input 1
1 INPUT 2
the reference source is input 2
2 LINKAGE 1 – 2 the reference source is the result of the linking of input1 and input 2
3 INPUT 1 TOTAL
the reference source is input 1 with totalization
4 INPUT 2 TOTAL
the reference source is input 2 with totalization
5 LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2 with
totalization
6 IO LINK VALUE 1 the reference source is the process data out value 1 sent by the IO-Link master
7 IO LINK VALUE 2 the reference source is the process data out value 2 sent by the IO-Link master
8 MINIMUM VALUE 1 minimum value, the reference source is input 1
9 MAXIMUM VALUE 1 maximum value, he reference source is input 1
10 MINIMUM VALUE 2 minimum value, the reference source is input 2
11 MAXIMUM VALUE 2 maximum value, he reference source is input 2
SOURCE DUAL DOWN (Reference source for two-line display, second line)
0 INPUT 1
the reference source is input 1
1 INPUT 2
the reference source is input 2
2 LINKAGE 1 – 2 the reference source is the result of the linking of input1 and input 2
3 INPUT 1 TOTAL
the reference source is input 1 with totalization
4 INPUT 2 TOTAL
the reference source is input 2 with totalization
5 LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2 with
totalization
6 IO LINK VALUE 1 the reference source is the process data out value 1 sent by the IO-Link master
7 IO LINK VALUE 2 the reference source is the process data out value 2 sent by the IO-Link master
8 MINIMUM VALUE 1 minimum value, the reference source is input 1
9 MAXIMUM VALUE 1 maximum value, he reference source is input 1
10 MINIMUM VALUE 2 minimum value, the reference source is input 2
11 MAXIMUM VALUE 2 maximum value, he reference source is input 2
The totalization depends on the operation mode. See chart in chapter IN 1 Totalization.
COLOR
This parameter defines the display color.
Event-depending change of the display color by a switching condition
is possible (see PRESELECTION 1…4 MENU)
Event-depending changes are
only available for devices with option CO350, A0350 or RL350.
0 RED Red display
1 GREEN Green display
2 YELLOW Yellow display