Ax350_04a_oi_e.doc / May-18
Seite 37 / 54
5.17
Command Menu
INPUT 1 ACTION
This parameter defines the function of the input “Ctrl. In 1”.
0
NO
No function
1
TARA INPUT 1
Value of input 1 is stored as an OFFSET of input 1
(d)
2
TARA INPUT 2
Value of input 2 is stored as an OFFSET of input 2
(d)
3
TARA INPUT 1+2
Value of input 1 is stored as an OFFSET of input 1
Value of input 1 is stored as an OFFSET of input 1
(d)
4
RESET TOTAL 1
Value of totalizator 1 is reset to zero
(d) (s)
5
RESET TOTAL 2
Value of totalizator 2 is reset to zero
(d) (s)
6
RESET TOTAL 1+2
Value of totalizator 1 is reset to zero
Value of totalizator 2 is reset to zero
(d) (s)
7
TEACH PRESEL. 1
Value (SOURCE 1) is stored as PRESELECTION 1
(d)
8
TEACH PRESEL. 2
Value (SOURCE 2) is stored as PRESELECTION 2
(d)
9
TEACH PRESEL. 3
Value (SOURCE 3) is stored as PRESELECTION 3
(d)
10 TEACH PRESEL. 4
Value (SOURCE 4) is stored as PRESELECTION 4
(d)
11 SCROLL DISPLAY
Display switching (see chapter Screen structure in operation)
(d)
12 RESET MIN/MAX
Reset the Min. / Max. values
(d) (s)
13 CLEAR LOOP TIME
N.A.
14 ACTIVATE
N.A.
15 STORE DATA
N.A.
16 TESTPROGRAM
N.A.
17 SET RED COLOR
Red display: Event-depending change of the display color by a switching
condition
is possible (see PRESELECTION 1…4 MENU)
(d)
18 SET GREEN COLOR
Green display: Event-depending change of the display color by a switching
condition
is possible (see PRESELECTION 1…4 MENU)
(d)
19 SET YELLOW COLOR
Yellow display: Event-depending change of the display color by a
switching condition
is possible (see PRESELECTION 1…4 MENU)
(d)
20 FREEZE
Freezing the display value
(s)
21 KEY LOCK
Key looked touch screen
(s)
22 LOCK RELEASE
No latch for preselection
(d)
23 SERIAL PRINT
Send serial data, see SERIAL VALUE
(d)
24 START PRESELECT
N.A.
25 ADD TO TOTAL 1
Adds the current value of input 1 to INPUT 1 TOTAL
(d)
26 ADD TO TOTAL 2
Adds the current value of input 2 to INPUT 2 TOTAL
(d)
(s) = statistical characteristic (level evaluation)
INPUT CONFIG must be set to ACTIVE LOW/HIGH
(d) = dynamical characteristic (edge evaluation)
INPUT CONFIG must be set to RISING/FALLING EDGE
