8 Settings via the MICT
96
Rev. 06/2020
The window
Log
serves to support error diagnostics by MOTORTECH.
–
Automatic scrolling
If the function is active, the view panel focuses on the latest message.
–
Log level
The selection of the log level is specified by MOTORTECH if needed.
–
Write log to file
This checkbox activates or deactivates, respectively, the saving of the logged data in a
selected file. If the function is disabled, the logged data are merely shown on the display.
–
Select file
With this button, you can select a file to which you want to save the logged data.
If you are prompted to create a log file in the case of a service request, proceed as follows:
1.
Open the window
Log
via the toolbar or the menu bar.
2.
Select a path with the
Select file
button and enter the file name for the log file.
▸
If the file does not yet exist, it is automatically created with the extension
.log
.
3.
Activate the checkbox
Write log to file
.
4.
Select the level specified by MOTORTECH from the list
Log level
.
5.
Leave the window open.
▸
The log messages are logged both in the window and in the selected file.
Summary of Contents for VariSCR
Page 1: ...VariSCR NOX Emission Controller Operating Manual P N 01 50 025 EN Rev 06 2020...
Page 111: ...Rev 06 2020 111...
Page 112: ......
