8 Settings via the MICT
Rev. 06/2020
77
Below the toolbar you will find the most important states and data of your system:
–
State
–
Warning
The yellow status display indicates that a warning is pending. The currently pending
warnings are displayed as a tooltip. Refer to the section
Runtime Data – Message Log
on
–
Error
The red status display indicates that an error has occurred. The current errors are
displayed as a tooltip. Refer to the section
Runtime Data – Message Log
–
Pump
The status of the pump is displayed. Following statuses are possible: Stop, Ready,
Operational, Cooling Time, Cooling Off, Cooling On, Error, Self Test, Manual.
The diagram shows the current pressure as a bar and value. The green triangle indicates the
target value. The tooltip displays the target value numerically. A red triangle at the
beginning or end indicates that the display range has been exceeded or fallen below.
–
Valve
The status of the dosing valve is displayed. Following statuses are possible: Stop, Ready,
Running, Error, Manual.
The diagram shows the current opening as a bar and value.
–
NO
X
For the NO
X
sensors, the values at the intake (top) and outlet (bottom) are shown in the two
diagrams. The diagrams show the current values as bars and values. For the NO
X
value at the
outlet, the target value is also indicated by a green triangle. The tooltip displays the target
value numerically. A red triangle at the beginning or end indicates that the display range has
been exceeded or fallen below.
Summary of Contents for VariSCR
Page 1: ...VariSCR NOX Emission Controller Operating Manual P N 01 50 025 EN Rev 06 2020...
Page 111: ...Rev 06 2020 111...
Page 112: ......
