8 Settings via the MICT
Rev. 06/2020
71
On this configuration page you define a characteristic curve for the feed forward control. A
maximum of eight points can be configured for this purpose. Each point consists of the dosing
rate in dependence of the exhaust gas mass flow. In addition, the maximum dosing rate can also
be set for each point of the characteristic curve. This setting must be determined once for each
SCR system. This is supported by an Excel
®
file that you can find on the storage device included
with the controller. For a detailed description of this procedure, see
Determine Values for Feed
Forward Control
Default
Use the button to restore the default settings.
8.11.7
Exhaust Control – Check
In this view, you make general settings for the verification of the measured NO
X
values.
Summary of Contents for VariSCR
Page 1: ...VariSCR NOX Emission Controller Operating Manual P N 01 50 025 EN Rev 06 2020...
Page 111: ...Rev 06 2020 111...
Page 112: ......
