26
Rev. 06/2020
Risk of destruction!
The VariSCR emission controller contains separate circuits. If these are
connected, this can cause damage to the device. Please adhere to the
following points:
–
The
GND
connections must not be connected to each other.
–
The
GND
connections must not be used for the supply (24 V DC).
–
The
GND
connections may only be connected to the respective
components (sensors, etc.).
Risk of damage to the device!
Incorrectly installed wiring can cause damage to the device. Please adhere
to the following points:
–
Do not disconnect connectors under load. This can cause an arc.
–
Use the prescribed wire cross sections and suitable wire end ferrules.
6 Wiring
Summary of Contents for VariSCR
Page 1: ...VariSCR NOX Emission Controller Operating Manual P N 01 50 025 EN Rev 06 2020...
Page 111: ...Rev 06 2020 111...
Page 112: ......