Motortech VariSCR, Operating Manual

Page: 51 / 112

8 Settings via the MICT
Rev. 06/2020 51
The status bar provides you with the following information (from left to right):
– Status display
Indicates whether a connection is established with the device:
– Green display: connection established
– Red display: the connection was interrupted and is being restored
– Gray display: the connection is not established and is not being restored
– Indication of the interface being used for the connection to the device
– Indication of the device ID
– Indication of the access level of the user in the MICT
– Indication of the operating level for the VariSCR emission controller if access control has
been activated and the user has logged on with a PIN.
– Indication of the MICT program version
8.5 Menu Bar and Toolbar
The following functions are available to you via the symbols on the toolbar and the entries in the
menu bar:
Symbol Menu Function
File -> New
Creates a new configuration.
File -> Open
Opens an existing configuration.
File -> Save /
File -> Save As
Saves the current configuration.
File -> Recent Documents
The last five configuration files used are offered for
selection.
File -> Close
Closes the current configuration.
File -> Open trace
Opens a runtime data record (trace file). Refer to the
section
Runtime Data on page 76.
File -> Open pickup trace
Opens a saved recording of pickup signals (putrace
file), for example from a MOTORTECH ignition
controller. Pickup signals cannot be recorded by of the
VariSCR emission controller.