Motorola V8162, Service Manual

Page: 8 / 93

V8160
Specifications
Overall System: AMPS.
Table 1:
Function Specification
Frequency Range
824.04 - 848.97 MHz Tx,
Channels 1 to 799, f
Tx
= 0.03 * N+ 825 MHz
Channels 990 to 1023, f
Tx
= 0.03(N—1023) + 825 MHz
869.04 - 893.97 MHz Rx
Channels 1 to 799 is f
Rx
= 0.03 * N+ 870 MHz
Channels 990 to 1023, f
Rx
= 0.03(N—1023) + 870 MHz
Channel Spacing 30 KHz
Channels 832
Duplex spacing 45 MHz(amps)
Frequency Stability +/- 2.5 ppm (Amps)
Operating Voltage 3.6 - 4.8 VDC
Display 96 X 32 LCD
RF Power Output
0.6 watts - 28.0 dBM into 50 ohms (AMPS, nominal)
0.25 watts - 24.0 dBM into 50 ohms (CDMA, nominal)
Input/Output Impe-
dence
50 ohms (nominal)
Spurious / Harmonic
Emissions Complies with Title 47, Part 22 of the code of Federal Regulations.
Audio Distortion Less than 5% at
Hum and Noise(C-
MSG) 32 dBm below +/- 8kHz deviation(transmit and recieve)
Modulation
F3: + 12 kHz for 100% at 1 kHz, AMPS (wide)
1M25D1W (1.25 MHz bandwidth) CDMA
Transmit Audio
Response
6 dBm/octave pre-emphasis
Transmit Audio sensi-
tivity
(AMPS)
+ 2.9 kHz deviation (nom.) @ 97 dBm SPL input @ 1 kHz
Transmit Duty Cycle
full, 1/2, 1/4, 1/8 rate (CDMA Mode)
CDMA Transmit
Waveform
Quality(Rho)
0.94
Reciever Sensitivity
-116 dBm (AMPS, SINAD, C-MSG weighted)
-104 dBm (CDMA, 0.5% Static FER)