Motorola V8162, Service Manual

Page: 40 / 93

V8160
12 0333
AMPS Initial A system channel. To initialize system A enter 0333.
13 0334
AMPS Initial B system channel. To initialize system B enter 0334.
14 021
AMPS Dedicated Paging Channels. Number of dedicated paging chan-nels
is 21. Enter 021.
15 00001000
D OPTION BYTE. The display for step 16 represents the status of
eight options, D7 through D0. D7 (msb) is programmed first, followed
by D6-D0. Bits enter display on the right and scroll to left.
0
Enhanced Scan (Bit D7). Enter 1.
0
Cellular Connection 1 (Bit E6). Normally set to 0.
0
Long Tone DTMF Enable (Bit E5). Normally set to 1.
0
Transportable Transducer Disable (Bit E4). Enter 0.
1
Bit not used (Bit E3). Normally set to 0.
0
Handset Test Mode Disable (Bit E2). Enter 0.
0
Failed Page Indication Disable (Bit E1).
0
Word Sync Scan Disable (Bit E0). Set to 1.
16 00100111
E OPTION BYTE. The display for step 16 represents the status of
eight options, E7 through E0. E7 (msb) is programmed first, followed
by E6-E0. Bits enter display on the right and scroll to left.
0
Bit not used (Bit E7). Enter 0.
0
* Preferred mode (Bit E6). Normally set to 0.
Bit 6 - 1 and Bit 5 - 1 = Analog preferred
Bit 6 - 1 and Bit 5 - 0 = Analog only
1
Preferred mode (Bit E5). Normally set to 1.
Bit 5 - 1 and Bit 6 - 1 = CDMA preferred
Bit 5 - 1 and Bit 6 - 0 = CDMA only
0
Extended Address Method (Bit E4). Enter 0.
0
Preferred Analog Serving System (Bit E3). Normally set to 0.
1
Config. for mob term using home SID, NID pair (Bit E2). Enter 1.
1 = Allow mobile terminated call while using a home (SID, NID) pair.
0 = Disallow mobile terminated call while using a home (SID, NID) pair.
1
Config. for mob term while SID roamer (Bit E1) Enter 1.
1 = Allow mobile terminated call while a SID roamer.
0 = Disallow mobile terminated call while a SID roamer.
Table 10:
Step
Factory
Default
Description