Motorola TEAM Badge (EWB100), Deployment Manual

Page: 35 / 146

EWB100 Usage and Deployment Guide Rev 1.13
Page 35
where x is the user password . It can be any length.
6.2.12 Encrypted User password
This command specifies the user password that is used in the authentication
sequence in an encrypted format. This allows the user password to be placed
into a configuration file that is downloaded over the network without any risk the
password may be lost. The encryption is performed via the
“clientencrypttool”
described later in this document The command to set the password is:
set rae ewpa2epass x
where x is the encrypted form of the user password . It can be any length.
6.2.13 User default user Password
This command specifies the user default version user password that is used in
the authentication sequence. The command to set the password is:
set ra defwpa2epass x
where x is the user password . It can be any length. It operates as do other user
default settings.
6.2.14 Encrypted User default user password
This command specifies the user default version user password that is used in
the authentication sequence as an encrypted. This allows the default user
password to be placed into a configuration file that is downloaded over the
network without any risk the password may be lost. The encryption is performed
via the “clientencrypttool” described later in this document. The command to set
the password is:
set ra edefwpa2epass x
where x is the encrypted user password It can be any length. It operates as do
other user default settings.
6.3 Clearing the certificate on the EWB
There may be desire to erase the server certificate on the ewb when a device is
removed from service. The command to do this is:
set ra wpa2eerase
6.4 Creating a Certificate for the EWB 100
If the ewb is configured to authenticate the server, then a certificate must be
loaded onto each device. The same certificate can be used on all devices.