Motorola TEAM Badge (EWB100), Deployment Manual

Page: 27 / 146

EWB100 Usage and Deployment Guide Rev 1.13
Page 27
5.2.7 WPA Password
This command sets the WPA/WPA2 PSK Password . The format is:
set radio password xyz
Where xyz is the password string. It may range from 8 to 63 ASCII characters.
This password must be set only after the ESS for the device has been specified.
This parameter cannot be displayed after being entered.
There is no default value for this parameter
5.2.8 User Default WPA Password
This command sets the “user default” wpa pasword. This value is used when the
system configuration is returned to “system defaults”. It has the same syntax as
the wpa passworde command:
set radio defpassword xyz
5.2.9 Encrypted WPA Password
This command sets the WPA password using an encrypted value. The password
must have been encrypted using the cliencrypttool program with an identical key.
The command format is:
set radio epassword xxx
Where xxx is the encrypted password. Note that xxx must be a multiple of 32 hex
digits up to a maximum of 128 hex digits.
There is no default value for this parameter.
5.2.10 Encrypted User Default WPA Password
This command sets the “user default” WPA password using an encrypted value.
The password must have been encrypted using the cliencrypttool program with
an identical key. The command format is:
set radio edefpassword xxx
Where xxx is the encrypted password. Note that xxx must be a multiple of 32 hex
digits up to a maximum of 128 hex digits.
There is no default value for this parameter.
5.2.11 Wpakey
This command sets the security key when TKIP or AESCCMP are used. It
contains 64 hex digits to create the 256 bit key. The command is
set radio wpakey xyz
Where xyz is the security key.
There is no default value for this parameter.