Motorola TEAM Badge (EWB100), Deployment Manual

Page: 65 / 146

EWB100 Usage and Deployment Guide Rev 1.13
Page 65
time or until the user exits the command by pressing on the volume up button. It
is used when a user does not want to be disturbed for an extended period of time
The format is:
set profile unavailable n y
Where n is the profile number (0-7) and y is either enable or disable.
The default is enabled.
11.4 Key Usage
These commands define the actions taken by various key operations for the
profile. Each profile can assign different actions to the same key operation. All of
the commands follow the following format.
Set profile key keyOp n app
Where n is the profile number and the keyOp can have the following values:

sappsc
– side application single click

sappdc
– side application double click

fappsc
– front application single click

fappdc
– front application double click

ptt -- push to talk button
app is the application to be invoked and is one of the following:

none
– no action is assigned

pr - enter switch profile app

wtt - enter wtt channel (contained in data below). Only the ptt key may
be assigned to this action

wacs
– switch to an alternative channel contained in the key data. Stay on
that channel for one wtt session or until a timeout occurs and then return
to the default channel

wace
– switch to an alternative channel contained in the key data. Stay on
that channel for until a timeout occurs and then return to the default
channel

replay
– the action is to replay the last incoming message. A suitable
“misc new3” setting must also be set, see section 8. (Rev H)
By default “ptt” is set to “wtt” and “sappsc” is set to “wacs”. All other key actions
are set to “none”