EWB100 Usage and Deployment Guide
Rev 1.13
Page 74
This command enables a user to change profiles during an active call. The
command is:
set misc new3 x
where x is the bit value 0x80
For this command to operate, the “short form profile switch” must also be
enabled. That feature is set via the command:
set mis new2 x
where x is the bit value 0x40
14.14
Minimum Audio Volume (rev J)
The minimum output volume can be set via the following commands. Such a
feature is when it is necessary to ensure a user hears a message regardless of
the volume set by the user. Essentially the user is not permitted to reduce the
volume below some set level. The command to define this is:
set audio minvol x
where x is the minimum volume setting and can range from 0 to 8. The default
value is 0.
Summary of Contents for TEAM Badge (EWB100)
