Motorola QIP7200 Series, User Manual

Page: 32 / 45

22
•
HDMI
If your A/V receiver supports it, the optical (OPTICAL S/PDIF), coaxial (S/PDIF), or
HDMI audio outputs may be used in place of the stereo audio outputs (AUDIO L and
R). In most cases these outputs offer a higher level of audio quality, including
support for Dolby Digital 5.1 audio.
•
Digital audio optical (S/PDIF) — Connect the optical cable to the digital audio
optical connector on the QIP receiver and the optical connector on the A/V
receiver.
•
Digital audio coaxial (S/PDIF) — Connect the digital audio cable to the digital
audio connector on the QIP receiver and the DIGITAL INPUT COAX connector on
the A/V receiver.
•
Stereo audio — Connect the stereo audio cable to the AUDIO L and R
connectors on the QIP receiver and the AUDIO LEFT and AUDIO RIGHT
connectors on the A/V receiver.
•
HDMI — Connect an HDMI cable to your A/V receiver and to the HDMI
connector on your QIP receiver.
For information on configuring your QIP receiver settings, see Optimizing Your QIP
Receiver for High-Definition TV .