Motorola QIP7200 Series, User Manual

Page: 15 / 45

2 OPERATION
Turning Power On and Off
Press
POWER
on the front panel or remote control to turn the QIP receiver on or off
(standby). When using the remote control, be sure it is in set-top mode before
pressing
POWER
.
Changing Channels
You can change channels in three ways:
•
Press
C
or
–
on the front panel of the QIP receiver or the remote
control to step through the channel selection.
•
Enter the number of the channel you wish to view using the number keys on the
remote control.
•
Select the channel in the Interactive Program Guide.
Adjusting the Volume
Press or
–
on the remote control to adjust the volume. When you adjust
the volume, the volume scale is displayed on the screen. Press
MUTE
on the remote
control to toggle the sound on and off.
For best audio quality, use the remote control to set the QIP receiver to
approximately three quarters of the maximum volume level and then adjust the
audio levels on external devices such as your TV or A/V receiver.
Interactive Program Guide
The Interactive Program Guide displays information about TV programs and enables
you to access features such as Parental Control or Pay-Per-View. Interactive program
guides can vary with each service provider. Refer to the Interactive Program Guide’s
instruction manual for detailed instructions.
M-Card™
The M-Card is required to view cable television programs, previously recorded
programs on the DVR, or interactive on-demand programs. The M-Card should not
be removed.
5