Motorola QIP7200 Series, User Manual

Page: 37 / 45

6 CONNECTING YOUR QIP RECEIVER
27
Connecting an A/V Receiver, TV, and VCR
1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the QIP
receiver and the INPUT L and R connectors on the A/V receiver.
2. Connect a video cable to the video out connector on the QIP receiver and the cable/TV
video connector on the A/V receiver.
3. Connect a stereo audio cable to the VCR AUDIO OUT L and R connectors on the A/V
receiver and the INPUT AUDIO L and R connectors on the stereo VCR.
4. Connect a stereo audio cable to the OUTPUT AUDIO OUT L and R connectors on the
stereo VCR and the VCR AUDIO IN L and R connectors on the A/V receiver.
5. Connect a video cable to the input video connector on the stereo VCR and the video
VCR OUT CONNECTOR on the A/V receiver.
6. Connect a video cable to the output video connector on the stereo VCR and the video
VCR IN connector on the A/V receiver.
7. Connect a video cable to the input video connector on the Stereo TV (SDTV) and the
TV/monitor output video connector on the A/V receiver.
If your equipment supports it:
•
The digital audio optical (OPTICAL S/PDIF) or digital audio (COAXIAL S/PDIF)
audio outputs may be used in place of the stereo audio outputs (AUDIO L and R).
In most cases these outputs offer a higher level of audio quality, including
support for Dolby Digital 5.1 audio.
•
S-Video connections may be used in place of the standard composite video
connections. In most cases, S-Video offers a higher level of standard definition
video quality than composite video.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting your QIP Receiver to an HDTV — Video Only on page . 17