Motorola PAGE WRITER 2000X User Manual Download Page 83 | Manualshive

Page: 83 / 100

background image

PageWriter

TM

2000X User’s Manual

74

•

Do not charge batteries other than Motorola’s 3.6 V
NiMH battery (0186386G01) in the Motorola battery
charger (0186388G02). Charging other batteries can cause
those batteries to burst or explode, resulting in personal
injury or property damage.

Battery Charger Safety

•

Do not expose the charger to rain or snow.

•

Use of an attachment not recommended or sold by
Motorola may result in a risk of fire, electric shock, or
injury to persons.

•

Make sure the cord is located where it will not be stepped
on, tripped over, pinched, or subjected to damage or
stress.

•

If you need to use an extension cord, make sure:

−

the pins on the plug of the extension cord are the
same number, size, and shape as those on the plug of
the charger;

−

the extension cord is properly wired and in good
electrical condition; and

−

the cord size is 18AWG for lengths up to 100 feet and
16AWG for lengths up to 150 feet.

•

Do not operate the charger with a damaged cord,
transformer block, or prongs; replace them immediately.

•

Do not operate the charger if it has been damaged in any
way; take it to a qualified service technician.

•

Do not disassemble the charger; if service or repair is
required, call Motorola at 1-800-548-9954. Incorrect
reassembly can result in a risk of electrical shock or fire.

•

Maximum ambient temperature around the power supply
must not exceed 40

°

C (104

°

F).

•

Keep battery contacts clean. Do not allow dirt or sticky
substances to accumulate on the contacts. If you need to
clean the contacts, unplug the charger to reduce the risk of
electrical shock. Use a slightly dampened cloth to clean
the contacts. Let the contacts dry before plugging the
charger into an AC outlet. Do not immerse in water.

Agency Approvals

The PageWriter 2000X smart pager has been approved for use
by the Federal Communications Commissions (FCC) and

«
...
81
82
83
84
85
...
»

Summary of Contents for PAGE WRITER 2000X





































































































Reviews:

No comments

Related manuals for PAGE WRITER 2000X

Brand: Alphapoc Pages: 9

Brand: Atus Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands