Motorola PAGE WRITER 2000X User Manual Download

Page: 24 / 100

How Your PageWriter 2000X Works

Insert the transformer’s two-pronged plug into any
standard 120 Vac power supply outlet.

Hold the pager face up over the charger.

Position the pager with the Motorola logo on the same
side as the charger’s red and green LED indicators.

The battery can be charged separately or while it is in the
pager. The charger is intentionally designed so that you
cannot place both the extra battery and the pager in the
charger at the same time.

Press the pager down into the charger until an audible
click is heard. The red LED indicator light means the
battery is charging.

Logo

Indicators

Transformer
Round Connector

Transformer
Two-pronged Plug

Summary of Contents for PAGE WRITER 2000X





































































































Search results

Summary of Contents for PAGE WRITER 2000X

Reviews:

Related manuals for PAGE WRITER 2000X

Brands by name

Popular brands

Motorola PAGE WRITER 2000X, User Manual

Search results

Summary of Contents for PAGE WRITER 2000X

Reviews:

Related manuals for PAGE WRITER 2000X

Brands by name

Popular brands