Getting started
7
Installing and charging the handset
1.
Make sure the battery ribbon is laying flat inside the
battery compartment and insert the 2 x AAA
rechargeable Ni-MH battery cells supplied. Please note
the ’+’ and ’-’ markings inside the battery compartment
and insert in the correct direction.
2.
Replace the battery cover: hook the two plastic clips into
place first, then lower and screw the cover into place.
Finally, screw the belt clip on. You can use a coin, e.g.
10c piece if you don’t have a screwdriver.
3.
If you are charging the batteries for the first time, place
the handset on the base to charge for at least 24 hours
continuously.
4.
When the handset is fully charged,
icon will
appear steady on the display. Plug the other end of the
telephone line cord (make sure that one end is already
plugged into the base) into the telephone wall socket.
Note
This unit adapts Induction Charging, as such there will be no
metal contacts on the handset or charging cradle
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry
out this process for all the handsets and chargers.
1.
Plug the charger power adaptor into the socket marked
on the underside of the charger and plug the other
end into the mains power wall socket.
2.
Remove the battery cover from the back of the handset
and insert the 2 x AAA NiMH rechargeable batteries
