24
Base settings
4.
Use
u
or
d
to hear and select a melody. Press
m
to confirm your selection.
5.
Press
n
repeatedly to exit and return to standby.
6.3
PIN code
Your O1 has a security PIN code which you will need to
change some of the settings on your phone. The default PIN
code is 0000. You may want to change this to prevent
unauthorised changes to your settings.
1.
Press
m
to open the main menu.
2.
Press
u
or
d
until
Setup
is displayed, then press
m
.
3.
Press
u
or
d
to select
Pin Code
and press
m
.
4.
Enter the current 4 digit PIN code and press
m
.
5.
Enter a new 4 digit PIN code and press
m
.
6.
Re-enter the new PIN code and press
m
.
7.
Press
n
repeatedly to exit and return to standby.
NOTE
For security when you enter each digit of the PIN code it will
be displayed as a *.
6.4
Dial mode
The dialling mode is pre-set to Tone (DTMF) dialling. If you
are using your O1 phone with an older type of switchboard/
PBX you may required to change this setting to Pulse
dialling. Contact your PBX/Switchboard provider if you are
unsure which setting to use.
1.
Press
m
to open the main menu.
2.
Press
u
or
d
until
Setup
is displayed, then press
m
.
3.
Press
u
or
d
to select
Dial Mode
and press .
4.
Use
u
or
d
to highlight the dial mode you want and
press
m
to confirm your selection.
5.
Press
n
repeatedly to exit and return to
standby.
NOTE
If the dial mode is set to pulse dialling you can switch
temporarily to tone dialling for the duration of the call.
After you press to get a line, press
<
and hold
*
before
you enter the telephone number. The number you enter will
be dialled out using tone dialling.
