Motorola O1 User Manual Download Page 3

Page: 3 / 43

IMPORTANT

Only use the telephone line cord supplied.
This equipment is not designed for making emergency telephone calls when the power fails.
Alternative arrangements should be made for access to emergency services.

Got everything?

• O1

handset

• O1

base

• 2 x rechargeable Ni-MH battery cells
• Power Adaptor for the base
• Telephone

line

cord

• 1

Belt

clip

• Wall

mounting

bracket

If you have purchased a O1 multiple pack you will also have the following additional items:

•  O1 handset & charger
•  2 x rechargeable Ni-MH battery cells
•  Power Adaptor for the charger

This User Guide provides you with all the information

you need to get the most from your phone.
Before you make your first call, you need to set up your phone.

Follow the simple instructions in ‘Getting Started’, on the next

few pages.

Summary of Contents for O1












































Search results

Summary of Contents for O1

Reviews:

Related manuals for O1

Brands by name

Popular brands

Motorola O1, User Manual

Search results

Summary of Contents for O1

Reviews:

Related manuals for O1

Brands by name

Popular brands