1-6
Computer Group Literature Center Web Site
Hardware Preparation and Installation
1
MVME2603/2604 Base Board Preparation
Figure 1-2 on page 1-9
illustrates the placement of the switches, jumper
headers, connectors, and LED indicators on the MVME2603/2604.
Manually configurable items on the base board include:
❏
Cache mode control (J3)
❏
Flash bank selection (J10)
❏
Serial Port 4 receive clock configuration (J16)
❏
Serial Port 4 transmit clock configuration (J17)
❏
Serial Port 4 transmit clock receiver buffer control (J20)
❏
Serial Port 3 transmit clock configuration (J18)
❏
System controller selection (J22)
In conjunction with the serial port settings on the base board, serial ports
on the associated MVME712M or MVME761 transition module are also
manually configurable. For a discussion of the configurable items on the
transition module, refer to
MVME712M Transition Module Preparation
on page 1-14
,
MVME761 Transition Module Preparation
on page 1-25
, or
to the respective user’s manuals for the transition modules (listed in
Appendix D, Related Documentation
) as necessary.
The MVME2603/2604 is factory tested and shipped with the
configurations described in the following sections. The
MVME2603/2604’s required and factory-installed debug monitor,
PPCBug, operates with those factory settings.
