xviii
Summary of Changes
This is the third edition of the Installation and Use manual. It supersedes
the May 1998 edition and incorporates the following updates.
Overview of Contents
Chapter 1, Hardware Preparation and Installation
, provides general
information, hardware preparation and installation instructions, operating
instructions, and a functional description of the MVME2603/2604 family
of single board computers.
Chapter 2, Operating Instructions
, supplies information for use of the
MVME2603/2604 family of single board computers in a system
configuration.
Chapter 3, Functional Description
, describes the MVME2603/2604 single
board computer on a block diagram level.
Chapter 4, Connector Pin Assignments
, provides pin assignments for the
interconnect signals for the MVME2603/2604 family of single board
computers.
Chapter 5, PPCBug
, describes the basics of PPCBug and its architecture,
describes the monitor (interactive command portion of the firmware) in
detail, and gives information on actually using the PPCBug debugger and
the special commands.
Chapter 6, CNFG and ENV Commands
, contains information about the
CNFG and ENV commands. These two commands are used to change
configuration information and command parameters interactively.
Date
Changes
Replaces
July 2001
All data referring to the VME CSR Bit Set Register
(VCSR_SET) and VME CSR Bit Clear Register
(VCSR_CLR) has been deleted. These registers of
the Universe II are unavailable for implementation
as intended by the MVME materials and the
Universe II User Manual.
V2600A/IH2
