manualshive.com logo in svg

Motorola MT7711, User Manual

Share
Download
Motorola MT7711 User Manual Download Page 82

 

 

 

 

82 

 

Compliance 

FCC Statement   

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: reorient or relocate the receiving antenna, 
increase the separation between the equipment and receiver, connect the 
equipment into an outlet on a circuit different from that to which the receiver 
is connected, and/or consult the dealer or an experienced radio/TV technician 
for help.   

 
FCC Radiation Exposure Statement:   

This equipment complies with FCC radiation exposure limits set forth for an 
uncontrolled environment and it also complies with Part 15 of the FCC RF 
Rules. This equipment must be installed and operated in accordance with 
provided instructions and the antenna(s) used for this transmitter must be 
installed to provide a separation distance of at least 20cm from all persons 
and must not be co-located or operating in conjunction with any other 
antenna or transmitter.    End-users and installers must be provided with 
antenna installation instructions and consider removing the no-collocation 
statement.   
 
This device complies with Class B Part 15 of the FCC Rules. Operation is 

Summary of Contents for MT7711




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands