18
WPS
Green
OFF: After boot-up, WPS is
OFF (not being used).
Blinking:
WPS is in discovery mode.
ON:
Light will remain solid
for 5 minutes after WPS
configuration is
successful.
TEL1 & TEL2
Green
OFF:
Phone service not
provisioned.*
Blinking:
Registration in process
OR Phone off-hook / Call
Active *
ON:
Phone on-hook /
Ready for calls
Battery
Green
OFF:
No battery installed,
depleted battery, or not
provisioned for phone
service
Blinking:
Battery is charging
Fast
Blinking:
Battery is not charging or
depleted; or if on back-up
power, battery is low.
ON:
AC Power Fail / Battery
back-up active
† If a blue light blinks continuously, this indicates partial service (at least one designated channel has not
completed bonding). You should still get high Internet speeds, but your service provider may want to know so
they can adjust their network.
* Please note: In some cases, if no telephone service is provisioned,
the Tel1 light may blink continuously.
The Tel2 LED will only light if Tel2 is provisioned for a second phone
line.
Summary of Contents for MT7711
