To configure and enable a Guest Network:
1
Select the desired Guest Network (there are seven available).
2
Click the Save button.
3
Select Enabled and click Save to enable the selected Guest
Network.
The following steps are optional. Follow them if you want to change the
default Guest Network Name and Password:
1
Select and delete the old Guest Network Name, then type in the
new Guest Network Name and click Save.
2
You can click the Show Key box to check your typing for
Password.
3
Select and delete the old Password, then type in the new
Password.
4
Click the Save button.
Summary of Contents for MG7310
