To change the Network Name and Password
1
Select and delete the old Network Name, then type in the new
Network Name.
2
Click the Save button.
3
You can click the Show Key box to check your typing for Password.
4
Select and delete the old Password, then type in the new Password.
5
Click the Save button.
Be sure to write down and save the new wireless network name and
password in a place where you can easily find it. One approach is to write it
on a small piece of paper and tape it on the bottom of your cable modem.
Some people like to take a picture of the settings with their phone, which is
fine as long as long as they save it in a place where they are sure to find it
when they need it.
Wireless Guest Networks
You can enable one or more Guest Networks to let friends use your Internet
connection without giving them access to other devices on your network.
To set up a Guest Network, first log into the Configuration Manager as
described in chapter 4. In summary, you type
192.168.0.1
in the address bar
of your browser, go to that address, enter the Username
admin
and
Password
motorola
, then click the Login button.
This will bring you to the Basic Status and Settings page. Click the Advanced
button in the upper right. This will bring you to the Status
Æ
Software page.
Hover over the Wireless menu item, and select the Guest submenu:
Summary of Contents for MG7310
