manualshive.com logo in svg

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual

Share
Download
Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download Page 90

5 - 2

MC9500-K Mobile Computer User Guide

Figure 5-1

Phone Keypads

To access the phone keypad tap 

Start

 > 

Phone

, press the F1 key or press the green key.

To receive calls when the MC9500-K is suspended, leave the phone radio turned on and ensure the MC9500-K is 

set to wake with any key.

Turning the Phone On and Off

Windows Mobile 6.1 devices include 

Wireless Manager

, which provides a simple method of enabling and 

disabling the phone.

To open 

Wireless Manager

, tap the 

Connectivity

 icon.

Figure 5-2

Opening Wireless Manager

Select 

Wireless Manager.

 The 

Wireless Manager

 window appears.

To toggle on or off the phone, tap

 Phone

 bar on the MC9596 or MC9598 or tap 

Broadband

 on the MC959B.

To configure settings for a connection, tap 

Menu 

>

 Phone Settings

.

Antenna Signal

MC9598

MC9596

NOTE

To receive calls when your device is suspended, leave the phone turned on.

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands