manualshive.com logo in svg

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual

Share
Download
Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download Page 171

Using Bluetooth 7 - 47

Figure 7-56

BTExplorer Settings - HID Tab

Profiles Tab

Use the 

Profile

 tab to load or remove Bluetooth services profiles. If a profile is not used, it can be removed to save 

memory.

Figure 7-57

BTExplorer Settings - Profile Tab

1.

Tap a check box next to the profile to load (activate).
The Serial Port profile is always active and cannot be removed.

2.

Tap 

Select All

 to select all profiles or tap 

Deselect All

 to deselect all profiles.

3.

Tap 

Apply

 to activate the profiles and then 

Close

 to exit the application.

Table 7-17

HID Tab Data

Item

Description

Enable Key Repeat

Enables key repeat functionality.

Delay

To increase key repeat delay, drag the 

Delay

 slider to the right. To decrease 

key repeat delay, drag the 

Delay

 slider to the left.

Rate

To increase key repeat speed, drag the 

Rate

 slider to the left. To decrease 

key repeat speed, drag the 

Rate

 slider to the right.

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands