manualshive.com logo in svg

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual

Share
Download
Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download Page 220

B - 2

MC9500-K Mobile Computer User Guide

Audio Modes

The MC9500-K can be in any one of the seven different audio modes. The mode is visually indicated by the VQM 

icon on the title bar.

Figure B-1

VQM Icon in Title Bar

The VQM icon indicates that the device is in speakerphone mode without Acoustic Echo Cancellation (indicated by 

the gray VQM icon). The audio modes and their corresponding VQM title bar icons are:

Changing Audio Modes

Depending upon the audio mode being used, the mode can be changed by tapping the VQM icon in the title bar. 

The audio mode can only be changed only while the user is on a call. 

Table B-1

VQM Icons

Icon

Description

Speakerphone with Acoustic Echo Cancellation.

Speakerphone without Acoustic Echo Cancellation.

Handset with Acoustic Echo Cancellation (device is in handset mode only while on 

a call).

Headset while on a call (Acoustic Echo Cancellation is not enabled for Bluetooth 

headsets).

Headset while not on a call.

Bluetooth headset while on a call (Acoustic Echo Cancellation is not enabled for 

Bluetooth headsets). White icon.

Bluetooth headset while not on a call. Gray icon.

VQM icon

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands