Motorola MC7090CN User Manual Download

Page: 99 / 130

Maintenance & Troubleshooting

5 - 7

Four Slot Ethernet Cradle

Table 5-4

Troubleshooting the Four Slot Ethernet Cradle

Symptom

Cause

Solution

Attempt by the EDA

to ActiveSync failed.

EDA removed from

the cradle while the

LED was blinking

green.

Wait one minute and reinsert the EDA in the cradle. This

allows the cradle to attempt another synchronization.

Using an outdated

version of

ActiveSync.

Visit

http://www.microsoft.com

for the latest ActiveSync

software.

ActiveSync on the

host computer has

not yet closed the

previous ActiveSync

session.

Wait one minute and reinsert the EDA in the cradle. This

allows the cradle to attempt another synchronization.

Incorrect cable

configuration.

Ensure the correct cable (Ethernet) is used with the cradle.

Communication

software improperly

configured.

Perform setup as described in the

MC70 Integrator Guide

EDA ActiveSync

disabled or not

configured to accept

network connection.

On the EDA, tap

Start

ActiveSync

Tools

Options

Options

button. Then, uncheck the

Enable PC sync using this

connection:

check box.

Host ActiveSync

disabled or not

configured to accept

network connection.

On the host computer, check

File - Connection Settings - Allow

network (Ethernet) Server Connection with this desktop

computer.

During

communication, no

data transmits, or

transmitted data was

incomplete.

EDA removed from

cradle during

communications.

Replace EDA in cradle and retransmit.

EDA has no active

connection.

An icon is visible in the status bar if a connection is currently

active.

Summary of Contents for MC7090CN



































































































































Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands

Motorola MC7090CN, User Manual

Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands