Motorola MC7090CN User Manual Download Page 120 | Manualshive

Page: 120 / 130

background image

Glossary - 10 MC7090CN User Guide

Symbol Aspect Ratio.

The ratio of symbol height to symbol width.

Symbol Height.

The distance between the outside edges of the quiet zones of the first row and the last row.

Symbol Length.

Length of symbol measured from the beginning of the quiet zone (margin) adjacent to the start

character to the end of the quiet zone (margin) adjacent to a stop character.

Symbology.

The structural rules and conventions for representing data within a particular bar code type (e.g.

UPC/EAN, Code 39, PDF417, etc.).

T

TCP/IP.

(Transmission Control Protocol/Internet Protocol) A communications protocol used to internetwork

dissimilar systems. This standard is the protocol of the Internet and has become the global standard for
communications. TCP provides transport functions, which ensures that the total amount of bytes sent is
received correctly at the other end. UDP is an alternate transport that does not guarantee delivery. It is
widely used for video transmissions where erroneous packets are not retransmitted. IP provides the routing
mechanism. TCP/IP is a routable protocol, which means that all messages contain not only the address of
the destination station, but the address of a destination network. This allows TCP/IP messages to be sent
to multiple networks within an organization or around the world, hence its use in the worldwide Internet.
Every client and server in a TCP/IP network requires an IP address, which is either permanently assigned
or dynamically assigned at startup.

Telnet.

A terminal emulation protocol commonly used on the Internet and TCP/IP-based networks. It allows a

user at a terminal or computer to log onto a remote device and run a program.

Terminal.

See

Mobile Computer

.

Terminal Emulation.

A “terminal emulation” emulates a character-based mainframe session on a remote

non-mainframe terminal, including all display features, commands and function keys. The VC5000 Series
supports Terminal Emulations in 3270, 5250 and VT220.

Terminate and Stay Resident (TSR).

A program under DOS that ends its foreground execution to remain

resident in memory to service hardware/software interrupts, providing background operation. It remains in
memory and may provide services on behalf of other DOS programs.

TFTP.

(Trivial File Transfer Protocol) A version of the TCP/IP FTP (File Transfer Protocol) protocol that has no

directory or password capability. It is the protocol used for upgrading firmware, downloading software and
remote booting of diskless devices.

Tolerance.

Allowable deviation from the nominal bar or space width.

Transmission Control Protocol/Internet Protocol.

See

TCP/IP.

Trivial File Transfer Protocol.

See

TFTP.

TSR.

See

Terminate and Stay Resident

.

«
...
118
119
120
121
122
...
»

Summary of Contents for MC7090CN



































































































































Reviews:

No comments

Related manuals for MC7090CN

Brand: Palm Pages: 408

Brand: MUNBYN Pages: 14

Brand: Extech Instruments Pages: 33

Brand: Seuic Pages: 19

Brand: Bluebird Pages: 108

PHL-5000 Series

Brand: Opticon Pages: 25

7600BG-122-B4EE - Hand Held Products Dolphin...

Brand: Hand Held Products Pages: 102

NP-Q1 User Manual (Vista)

Brand: Samsung Pages: 204

A626 - MyPal - Win Mobile 6.0 312 MHz

Brand: Asus Pages: 109

Brand: HP Pages: 186

Brand: HP Pages: 150

Brand: HP Pages: 202

Jornada 540 Series

Brand: HP Pages: 135

Brand: Symbol Pages: 44

Brand: Minix Pages: 20

Brand: Minix Pages: 21

PDT 3400 Series

Brand: Symbol Pages: 146

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands