Motorola MC7090CN User Manual Download Page 4 | Manualshive

Page: 4 / 130

background image

ii

MC7090CN User Guide

© 2015 ZIH Corp and/or its affiliates. All rights reserved.

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying,
recording, or information storage and retrieval systems. The material in this manual is subject to change
without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on
a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software
or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be
assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to
copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall
not modify, merge, or incorporate any form or portion of a licensed program with other program material, create
a derivative work from a licensed program, or use a licensed program in a network without written permission
from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered
hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not
to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any
portion thereof.

Zebra reserves the right to make changes to any software or product to improve reliability, function, or design.

Zebra does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Zebra, intellectual
property rights. An implied license only exists for equipment, circuits, and subsystems contained in Zebra
products.

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty

«
...
2
3
4
5
6
...
»

Summary of Contents for MC7090CN



































































































































Reviews:

No comments

Related manuals for MC7090CN

Brand: Palm Pages: 408

BIS V-830-3-011-B-000

Brand: Balluff Pages: 24

Brand: palmOne Pages: 104

Brand: e-survey Pages: 26

Brand: Dotel Pages: 22

Brand: M3 Mobile Pages: 76

Brand: Palm Pages: 2

Brand: Symbol Pages: 4

Brand: ChekOne Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands