Motorola MC7090CN User Manual Download Page 11

Page: 11 / 130

About This Guide

•

Chapter 5, Maintenance & Troubleshooting

includes instructions on cleaning and storing the EDA, and

provides troubleshooting solutions for potential problems during EDA operation.

•

Appendix A, Technical Specifications

provides the technical specifications for the EDA.

Notational Conventions

The following

conventions are used in this document:

•

“EDA” refers to the MC7090CN series of hand-held EDAs.

•

Italics

are used to highlight the following:

Chapters and sections in this and related documents

Dialog box, window, and screen names

Drop-down list and list box names

Check box and radio button names

Icons on a screen.

•

Bold

text is used to highlight the following:

Key names on a keypad

Button names on a screen.

•

bullets (•) indicate:

Action items

Lists of alternatives

Lists of required steps that are not necessarily sequential

•

Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

Summary of Contents for MC7090CN



































































































































Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands

Motorola MC7090CN, User Manual

Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands