4 - 2
MC7090CN User Guide
Multi Media Card (MMC) / Secure Digital (SD) Card
The MMC/SD card slot provides secondary non-volatile storage. The slot is located on the side of the EDA
(see
). Refer to the documentation provided with the card for more information, and follow the
manufacturer’s recommendations for use.
To insert the MMC/SD card:
1.
Power off the EDA.
2.
Remove the card cover on the side of the EDA by loosening the screws and lifting the cover out of the slot.
Figure 4-1
Card Cover Removal
3.
Insert the card with the card contacts facing down and the cut corner on the right, until you feel a click.
4.
Replace the housing cover and secure with the screws.
To remove an MMC/SD card:
1.
Power off the EDA.
2.
Remove the card cover at the top of the EDA by loosening the screws and lifting the cover out of the slot.
3.
Using the stylus, press and release the card to eject it.
4.
Remove the card from the card slot.
5.
Replace the card cover.
NOTE
SD cards are interoperable with MMC cards; both can be used in MC7090CN EDAs.
CAUTION
Follow proper ESD precautions to avoid damaging the MMC/SD. Proper ESD precautions
include, but are not limited to, working on an ESD mat and ensuring that the operator is properly
grounded.
!
Summary of Contents for MC7090CN
