Motorola KVL 4000 User Manual Download Page 164

Page: 164 / 236

KVL 4000 Key Variable Loader ASTRO 25 User Guide

Procedure Steps

On the KVL main screen, select

Settings → KMF → IP address

Step result:

A decimal keypad appears.

Enter the IP address of the Main KMF.

Select the

Backup

tab and enter the IP address of the Backup KMF.

Tap

Done

Step result:

The IP addresses are set.

Tap

Done

on the consecutive screens to return to the KVL main screen.

7.1.6 Entering the KMF RSI

The KMF requires a Radio Set Identifier (RSI) in order to operate in the OTAR system. The KVL only accepts keys
and KMMs from the KMF with this RSI.

Prerequisites:

Only an Administrator can enter the KMF RSI.

When and where to use:

Use these steps to enter the KMF RSI.

Changing the KMF RSI removes received jobs.

7-8

6871018P37-F - January 2013

Summary of Contents for KVL 4000












































































































































































































































Search results

Summary of Contents for KVL 4000

Reviews:

Brands by name

Popular brands

Motorola KVL 4000, User Manual

Search results

Summary of Contents for KVL 4000

Reviews:

Brands by name

Popular brands