Motorola KVL 4000, User Manual

Page: 101 / 236

2.1.4.2.3 Changing the Administrator Password
Procedure Steps
1
Log on as an Administrator.
If you are prompted for upgrades, select
No, not now
.
Step result:
The KVL main screen appears.
2 Select Settings → Security → Passwords → Update passwordsAdministrator .
Step result: The Current password , New password , and Repeat password entry fields.
3 In the Current password entry field, type the current password using the PDA keypad.
4 In the New password entry field, type the new password.
The password must contain between 15 and 30 characters, including at least 1 special character, 1
numeric character, and 1 uppercase character. The following special characters are acceptable: ! " # $
% & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
As you type the password, dynamic hints about password rules appear.
5
In the
Repeat password
entry field, type the new password again.
Step result:
If the passwords match, the
Done
button is enabled.
To abort the operation at any time, tap Cancel .
6 Tap Done .
Step result: The password has been changed.
7 Tap Done on the consecutive screens to return to the KVL main screen.
If you forget the Administrator password, you must perform a system reset before the KVL can be used
again. Since a system reset erases all stored keys and returns the KVL settings to the factory defaults,
you must enter all keys again.
6871018P37-F - January 2013
2-9