Motorola KVL 4000 User Manual Download Page 163

Page: 163 / 236

7.1.5 Entering Main and Backup KMF IP Addresses

Procedure Steps

On the KVL main screen, select

Settings → KMF → KMF port

Step result:

A decimal keypad appears.

Enter the port number for the Main KMF.

The available range is 49156 through 65535.

If you change the default value, ensure it matches the port number configured on the KMF.

Select the

Backup

tab and enter the port number for the Backup KMF.

Tap

Done

Step result:

The KMF ports are set.

Tap

Done

on the consecutive screens to return to the KVL main screen.

7.1.5 Entering Main and Backup KMF IP Addresses

For the KVL to connect with the KMF through the Network, you need to configure the KMF IP address on the KVL.

Prerequisites:

Only an Administrator can enter Main and Backup KMF IP addresses.

Obtain the IP address from your radio network administrator.

The IP address have to be IPv4.

6871018P37-F - January 2013

7-7

Summary of Contents for KVL 4000












































































































































































































































Search results

Summary of Contents for KVL 4000

Reviews:

Brands by name

Popular brands

Motorola KVL 4000, User Manual

Search results

Summary of Contents for KVL 4000

Reviews:

Brands by name

Popular brands