BASIC LEVEL TEST MODES AND PROCEDURES:
Test Modes
34
68P80401P05
To exit Debug Mode, press the option key under
Back
.
6.1.2
Trace Mode Display Screens
Display screens on this unit provide information that is useful for troubleshooting purposes. These
displays appear only when the unit is placed in Debug Mode (see “Entering Debug Mode” on page
6-1).
To navigate through the screens, press the appropriate scroll key to highlight the desired screen, and
then press the View option key. To select a choice within a screen, press the Select option key. To
exit from a choice or screen, press the Back option key.
Table 6-1. Display Screens
Name
Description
Unit Info
• Phone Model
• CP Ver
• USR Ver
• CSD Ver
• Software
Tegic
Flash Packs
Displays the unit model number and product sub ID, such as
i
580 and A.
Displays the Codeplug Version. The first half of the line displays the codeplug structure and
default version; the second half displays the codeplug bandmap.
Version of carrier specific modification to the product code plug. Programmed at shipment.
Displays the Customer Static Data version. The first number indicates the customer. The
second number indicates the structure revision. The third number indicates the data revision.
Displays the current software version programmed in the unit, as well as the software type
(RSS model) and build date.
Text 9 code version/LDB version.
Version of the preferred language: French, Spanish, Hebrew, Korean, or Portugese and the
associated Font Pack.
Total Usage
Displays the number of minutes the unit has used a traffic (dispatch and interconnect) or a
Packet Data channel since manufacture.
Tx Status
First line displays the SQE/Carrier data: Outbound signal quality, Frequency band, current
carrier code, and color.
Second line displays Tx power cutback in RSSI.
Third line displays current temperature and the difference between the current temperature
and temperature 2 seconds ago.
Rx Status
First line displays the SQE/Carrier data: Inbound signal quality, Frequency band, current
carrier code, and color.
Second line displays Rx power cutback in RSSI.
Third line displays AGC Step Attenuator State, Channel Code.
