manualshive.com logo in svg

Motorola iDEN i580, Field Service Manual

Share
Download
Motorola iDEN i580 Field Service Manual Download Page 89

FIELD LEVEL TEST MODES AND PROCEDURES:

  MOTOtalk

74

68P80401P05

8.15

MOTOtalk

Perform BER Test and TX Power Test prior to the MOTOtalk Test. If these tests do not pass, replace 
the Main Board. Use the MOTOtalk Test to test MOTOtalk without test equipment. Perform the 
MOTOtalk Test with the golden radio as transmitter, determine pass or fail. Then, use the golden 
radio as receiver and determine pass or fail.

No

Voice

received on the

receiving radio

?

Place each radio on 
Channel 1 and Code 1:
1. Edit.
2. Edit.
3. Scroll to 1.
4. OK.
5. Down. (to Code)
6. Edit.
7. Scroll to 1.
8. OK.
9. Back.

1. Place Radios 5-10 feet apart.
2. Press PTT on one radio.

Yes

Fail if 5

attempts failed.

Pass

Place radio under test and a golden 
radio into MOTOtalk Mode:
1. Menu.
2. More.
3. Down.
4. Down.
5. Right.
6. Right.
7. OK.
8. OK.

Summary of Contents for iDEN i580












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands