BASIC LEVEL TEST MODES AND PROCEDURES:
Test Mode Test Procedures
68P80401P05
39
11. Press
Back
to return to the
Trace Mode
display.
12. Scroll down to highlight
GPS
, and then press
View
to view the
GPS
display.
a.
Location
selection displays the number of satellites used to obtain the position fix, the
current cell site latitude and longitude, the subscriber unit latitude and altitude information,
as well as the last calculated horizontal and vertical accuracy.
b.
Time
selection contains
i
DEN time information used to determine accurate GPS time.
c.
Assist
selection contains the subscriber unit latitude, longitude and horizontal accuracy in
meters as well as an indication of whether the data is valid or not.
d.
Navigation
selection contains the heading as well as velocity and velocity error in
kilometers/hour.
e.
Summary
selection contains time and longitude/latitude expressed in degrees. Accuracy in
meters is also displayed.
f.
GPS Version
contains information about the custom Sirf software used in the unit.
13. Press
Back
to return to the
Trace Mode
display.
14. Scroll down to highlight
IMEI/SIM ID
, and then press
View
to view the
IMEI/SIM ID
display. The IMEI is the global name assigned to the mobile station at manufacturing time and
should correspond to the serial-number tag of the unit. The SIM ID is the SIM electronic serial
number and should correspond with the number stamped on the SIM card.
15. Press
Back
to return to the
Trace Mode
display.
16. Scroll down to highlight
Registr Log
, and then press
View
to view the
Registr Log
display.
This screen displays the Dispatch Log, Interconnect Log, Packet Data Log, Mobile IP Log, and
Phone Rst Log. Registration Log information is updated when the user deselects and selects the
Registr Log choice.
17. Press
Back
to return to the
Trace Mode
display.
18. Scroll down to highlight
Err/Chan Codes
, and then press
On
to view the
Err/Chan Codes
display. This screen displays the physical channel that the unit is connected to or the radio link
procedure that is currently active. Also, displays error codes of errors encountered during
normal operation if Err/Chan codes is On. (At power up, Err/Chan Codes is Off)
19. Press
Back
to return to the
Trace Mode
display.
20. Scroll down to highlight
Current Freq
, and then press
View
to view the
Current Freq
display,
which shows the current frequency and band.
21. Press
Back
to return to the
Trace Mode
display.
22. Scroll down to highlight
Dispatch IDs
, and then press
View
to view the
Dispatch IDs
display.
This screen displays the dispatch group id affiliated with the unit in the current dispatch-
location area. Also, displays the dispatch individual id affiliated with the unit in the current
dispatch location.
23. Press
Back
to return to the
Trace Mode
display.
