Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP, User Manual

Page: 38 / 84

Working with the MHM Program Home Monitoring & Control System
29 MHM User Guide
Arming/Disarming
Devices are triggered by certain events when armed. For example, if configured, a
temperature lower than the low threshold setting triggers the sensor to record the event.
ƒ
To arm all sensors and cameras, click . The Status line updates to state:
“System Armed.”
ƒ
To Arm after a selected period (giving you time to
leave the house, for example), select a time from
the Schedule drop-down menu and then click
Arm .
ƒ
To disarm all sensors and cameras, click . The Status line updates to state:
“System Not Armed.”
Status Icon Description
Item Description
The sensor is functioning normally.
No data is available. The MHM program hasn’t communicated with the sensor yet.
Wait at least 60 seconds and if still not connected and then try re-discovering the
sensor. The wait period may be up to 20 minutes for Discovery.
No communication is possible. The gateway cannot reach the sensor. Check the
batteries, if powered, try re-discovering the sensor or repositioning it.
Retrieve Event
When the Temperature Sensor is configured in Event Setup , is armed and detects an
event, it sends an event marker to the Archives. Refer to Archives for further details.