Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP Page 75 User Manual Download

Page: 75 / 84

Home Monitoring & Control System

FAQ

MHM

User

Guide

Frequently Asked Questions (FAQ)

I see the following message during MHM software installation for the USB Driver
with Windows XP:

Has not passed LOGO Testing

Currently there is an open issue in Windows XP where a message is displayed during the
USB driver installation that reads:

The software you are installing for this hardware SuperXan USB Vision (4) has not passed
Windows LOGO testing …

Corrective Action: Select

Continue anyway

to proceed with your installation.

I see the following message during MHM software installation for the USB Driver
with Windows 2000:

Digital Signature not found

Currently there is an open issue in Windows 2000 where a message is displayed during the
USB driver installation that reads:

Digital Signature Not Found

Corrective Action: Select

Yes

to continue with the installation.

With Windows ME, an older version of

stream.sys

to be installed message is

displayed during MHM software for the USB Driver.

Currently there is an open issue in Windows Me where if the PC has a newer version of the
file

stream.sys

than the version to be installed by the MHM program and a warning

message is displayed.

Corrective Action: Select

Yes

to maintain the newer version and continue with the

installation.

I don’t see a caption in the live camera view window.

There is no caption displayed for some or all camera images displayed in the live camera
view window.

Windows Me or Windows 2000

: The caption can be turned on or off for each camera by

opening the edit panel for a camera and selecting on or off, and then clicking

Set

to apply

the change.

Windows XP:

The MHM program has an issue with displaying the captions in Windows

XP. Captions have been disabled in Windows XP until this issue is resolved. Caption
selection on the edit panel has no affect.

Summary of Contents for EASY START KIT HMEZ1000 - CELL PHONE SET UP





















































































Search results

Summary of Contents for EASY START KIT HMEZ1000 - CELL PHONE SET UP

Reviews:

Related manuals for EASY START KIT HMEZ1000 - CELL PHONE SET UP

Brands by name

Popular brands

Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP, User Manual

Search results

Summary of Contents for EASY START KIT HMEZ1000 - CELL PHONE SET UP

Reviews:

Related manuals for EASY START KIT HMEZ1000 - CELL PHONE SET UP

Brands by name

Popular brands