Home Monitoring & Control System
Issues and Solutions
54
MHM
User
Guide
Wireless camera is displayed on the device list with a RED icon with a status of
No communications with device.
The wireless camera was discovered and functioned properly, but is reporting a status of
No communication with device
. Take the following steps to correct this condition:
1
Disarm the system.
2
Select the wireless camera from the drop down menu.
3
Verify that there is no image from the camera. If you see an image from the camera,
restart the MHM program.
4
Verify that the Wireless Camera LED is on.
If the LED is on:
-Move the camera closer to the USB Gateway so that both are within a direct line of
sight and neither is close to any metal objects like a PC tower or electrical
appliance.
-If batteries are used, try the AC adapter since the batteries may be discharged.
-Try restarting the MHM program.
-Go to Discovery, delete the camera, and re-discover it.
If the LED is not on:
-If batteries are used:
Verify that the switch is in the on position.
Try the AC adapter since the batteries may be discharged.
-If the AC adapter extension cable is used, remove the extension cable and use the
AC adapter directly.
-If the AC adapter is used without the extension:
Verify the connection into the camera.
Verify the connection into the AC outlet.
Plug a lamp into the AC outlet to verify that AC outlet works.
Summary of Contents for EASY START KIT HMEZ1000 - CELL PHONE SET UP
Page 1: ......
Page 9: ......
Page 84: ...Visit our website at www motorola com homemonitoring 506229 001 08 04 MGBI ...
