41
Base settings
4. Scroll or to
All Handsets
or
Select Handset
then press
Select
.
If you choose
Select Handset
, all available handsets are displayed.
•
Scroll or to the handset you want then press
Select
.
•
Scroll or to the number of rings that you want to set:
2
,
4
or
6 Rings
and press
Select
.
5. Press
to return to standby.
9.5 Recall
mode
Recall is useful to access certain network services and PABX /switchboard
services.
The default recall mode preset in the C5010A is suitable for your country
network and therefore you should not need to change it.
NOTE
The use of the C5010A cannot be guaranteed on all PABX.
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scroll to
Set Base
and press
Select
.
3. Scroll to
Recall Mode
and press
Select
.
4. Scroll or to
Recall 1
or
Recall 2
and press
Select
.
5. Press
to return to standby.
9.6 Switch first ring on/ off
If you have subscribed to your network’s Caller ID service, the C5010A will
not ring until the caller information has been received and displayed.
However, if you want your handset to ring without waiting for the caller
information to be displayed, set First Ring to On. Please note that this will
mean that the first ring you hear will be the default ringtone. It will change to
the ringtone that you have set once the caller information is displayed.
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scroll to
Set Base
and press
Select
.
3. Scroll to
First Ring
and press
Select
.
4. Scroll or to
On
or
Off
then press
Select
to confirm.
5. Press
to return to standby.
9.7 Change the System PIN
The System PIN is required when changing certain settings and for
registration / de-registration. The default setting is 0000. You can change this
to your own preferred number (up to 8 digits).
When you enter a PIN, the digits are shown as
****
.
